• Article Thumb

    Einsatz in Behälter

    Use inside of a tank

  • Article Thumb

    Mehrstufiger Einsatz

    Multiple-Stage-Use

  • Article Thumb

    Einsatz als Mischdüse

    Use as a mixing nozzle

Steam Injectors / Mixing Nozzles

Field of application

Use as mixing nozzle

Another application field for these steam injectors is the use as mixing nozzles for two different kinds of components. The extremely even allocation of the second component over the annular slot guarantees the best distribution/intermixing of the components, due to the following flow turbulence caused by the conical pipework extension.

Muliple-Stage-Use

To reduce the space requirements and material usage and costs, we have developed new 2 - and 3-stage variants, which allow us to increase the performance of the steam injectors to 3-fold. Several internal parts are installed in only one Case and are supplied through an outer casing pipe with steam. All previously required flanges between the steps become no longer necessary.

Use inside of a tank

Our steam injectors can also be installed below liquid/water level to directly heat up water or other water compatible liquid mediums inside containers, vessels or tanks. The steam will be quietly induced into the liquid and completely condensed. The suction effect of the injector causes a medium flow inside the vessel and thus causes a uniform temperature inside the container.

Use as hotwaterstation

One time passing waterflow with a large Delta is heated up with these stations. Several steam injectors are arranged in series and are controlled by a thermostatic control valve to receive an even steam pressure admission. This station can also be used in case of various water quantities. The layout is executed on the waterside depending on the least amount of throughput (1,0m/sec). The quantity of steam injectors depends on the steam throughput for the greatest amount of throughput / max. flowrate. It is recommended to establish a short-circuit line between water entry and water outflow, so that the temperature of the station remains at its setpoint / temperature should no water be removed from the station and the minor amount of condensate (radiation loss of the station) can be removed.